The processing of graphite rods is made by baking, extruding and forming a layer of copper with carbon and graphite plus a binder. It is more resistant to high temperature and not only has good conductivity and is not easy to crack. Graphite rod electrodes are widely used, mainly in electric arc steelmaking furnaces, submerged electric furnaces, and resistance furnaces. Electric arc steelmaking furnace uses graphite rod processing electrodes to introduce electric current into the furnace, and the heat generated by the electric arc is used for refining. Depending on the size of the electric furnace, different graphite electrodes are required.
Some issues that need to be paid attention to during the processing of graphite rods: the problem of dust removal, due to the fine particle structure, will generate a large amount of dust during processing, which will cause greater damage to the natural environment. The conductive performance of graphite rods is relatively good, but also due to After the dust enters the power box, the power supply is short-circuited, so it is advocated that the processing of graphite rods needs to be equipped with special machines for processing. When processing graphite rods, it can be processed after immersion in oil. After purchasing graphite, it can be processed after soaking in spark oil, so that graphite dust will not fly randomly, which will greatly reduce the damage to equipment and the environment. A vacuum cleaner is installed on the machine for processing graphite rods, which will also prevent dust from flashing randomly.
Exhaust ,Turbo manifold,Exhaust header,Tail Pipe,Exhaust catback,Exhaust muffler.